A1, A2 MTX MECHANICAL TOP FILLING MACHINES
A1, A2 MTX MECHANICAL TOP FILLING MACHINES
RANGE OF PRODUCTS:
The A1, A2 and A4 models are available for any non-foaming food, petroleum or chemical product which will flow, settle out in the container and does not contain hard solids. Machines available in Brass and Steel (standard), 316 Stainless Steel, Sanitary Stainless Steel, Titanium, or PVC product contact parts to suit a wide range of products. For foaming products, see AF, F and EF series fillers.
RANGE OF CONTAINERS:
Any free standing glass, metal, plastic or box-in-bag container from 500 ml to 25 liters (pint to 6 US gallons). Filling nozzles are available for containers with openings as small as 13mm (1/2in.). For larger containers, see Crandall Fillers will Bench Scales and Drum Fillers.
FILLING SPEED:
Based on the gravity filling of water from a tank 3 meters (10 ft.) above filling platforms into open top containers
ACCURACY:
The Crandall weighing system is specially designed for the filling operation. This insures accurate filling under plant conditions. The system will give sustained accuracy within +/-0.5% of the target weight when it is properly installed and operated.
INSTALLATION:
Type A fillers are shipped complete and assembled and can be quickly installed by your plant personnel. No special foundation is necessary. Motors on models with motorized conveyors are provided to the purchaser's electrical specifications. To install, simply place the machine in its operating position, connect the product supply line, and connect the electrics (if the machine has a motorized conveyor). If the machine is a pneumatically operated model, it has a filter/regulator/lubricator system to prepare plant air for machine use.
SUPPLY OF PRODUCT:
The machine may be supplied from any source which will provide a constant flow rate to each nozzle. Mechanically operated models may have supply line pressure from gravity to 1.1 kg/sq. cm (15 p.s.i.g.). Pneumatically operated models may have supply line pressure from gravity to 3 kg/sq. cm (40 p.s.i.g.).
MAINTENANCE:
Sturdy designs and construction guarantees many years of service. No special tools are necessary to make adjustments.
SAFETY:
Operation of the filling system is non-electric. Motors on models with motorized conveyors are Class 1, Group D, Explosion Proof-UL and CSA approved. There are no large moving parts to injure the operator. On pneumatically operated models the operator has access to a quick shut-off button.
PERSONNEL REQUIRED:
One operator, unskilled.
CHANGE OF CONTAINER:
To change the container, adjust the height of the filling nozzle using the rack and gear system and adjust weights. If the container opening size is different, change the filling nozzle.
OPERATION:
A1 - The operator places a container on the filling platform and initiates the fill. The nozzle closes automatically when the shut-off weight is reached.
A2 - The operator places two empty containers on the filling platforms, discharging the filled containers, and initiates the fill. When the shut-off weight is reached on each filling platform, the nozzle closes.
A4 - The operator places four containers in the loading rack. When all nozzles are closed, the operator pushes the loading rack forward, putting the empty containers onto the filling platforms and discharging the filled containers. The operator initiates fill and all nozzles open. When the shut-off weight is reached on each platform, its nozzle closes. While the containers fill, the operator loads the rack with four empty containers.
AIR REQUIREMENTS:
Mechanical Models: None. Pneumatic Models: 0.8 liters at 4.2 kg/sq. cm (60 cu. in. at 80 p.s.i.g.) per container filled.
ELECTRIC REQUIREMENTS:
Models with motorized discharge conveyors only - 5.5 amps maximum depending on voltage used.
NOISE CONTROL
On pneumatically operated models, cylinders exhaust through ports with mufflers. A level
